Not much to say about it's function as it's just a block off plate. It sealed fine for the short time I had it on before replacing it with a half inch thick block off plate. I'm posting to show the "quality issue" as it's written in the parts review/feedback rules. Picture speaks for itself.
EDIT: I received a PM from Jayracing wanting to know what the problem was. I thought it was pretty obvious. For a shop that advertised welding/fabrication service, you don't expect your welded part to be melted and the beads(if you can even call it that) full of pores. They even sanded the welds to smooth out the sloppy work.
EDIT: I received a PM from Jayracing wanting to know what the problem was. I thought it was pretty obvious. For a shop that advertised welding/fabrication service, you don't expect your welded part to be melted and the beads(if you can even call it that) full of pores. They even sanded the welds to smooth out the sloppy work.
Attachments
You must be registered for see attachments list
