How to Installing ECLIPSE by fujisu ten deck?

[AdvanEclipse]

I cant get my deck to work. I blowed my fuse twice already and the deck wont work. I dont know if it could be my ground. if it is where should I ground it. OR could it be my wiring harness. IF anyone can help me this would be great. thanks Bobby

 

[rolemodel]

If your deck is not screwed to the mounting rack it will not work...i unscrewed it once and i did not work anymore but when i putted it back on it was working again. It has to be screw to the rack so it grounded.

 

[chriw21_2000]

Most of the time if it isn't screwed in it will still work. How would it be grounded that way with the aftermarket mounting kits that are plastic? Most of the time the antenna (cant spell it) acts as a chassis ground. But that wouldn't make a difference if wired properly. Check to make sure no wires are shorting out and double check that all power sources are hooked correctly (red and yellow are main power wires) The yellow should 12v constant and red on and off with the key. Does it blow the fuse when the key is turned on or when the battery cable is reinstalled?

 

[AdvanEclipse]

it blow the fuse when the key is turned on