Wiring up dual projector headlights

[TOTalon]

For anybody that has these, how did you wire them up? I know the single projectors have a little connector on the bottom that the wires just clip into. However, the dual projectors dont, Im assuming because they use the 9005/9006 bulbs. Whats the deal?

 

[shuwa29]

um, i'm not following you. i know the connector under the headlight connects to the connector from the car giving them power. and the inside of the headlight should already be wired with the bulb harness and all.
later

 

[TOTalon]

There is no inside of the light with the dual projectors. There are just two sockets on the back where the hi and low bulbs go into, and thats it. Is there some kind of harness you can buy that will connect the two bulbs to the wire from the car? I think I read somewhere that you can use the harness from the stock lights, but I imagine that would require opening them up to remove it. There must be another way.

 

[shuwa29]

yeah you can use the ones from your old lights or you can buy the harnesses if you really want to. www.nopionline.com has the harnesses for sale.
later

 

[rockice]

i have never seen dual projectors for eclipses?????

 

[shuwa29]

apc makes them. good thing is they do use the stock bulb instead of the H3's like mine.
later