factory radio codes

[turboclipse]

Hey guys...gotta question, Ive got a 95 gst with a factory radio I was having work done on it and had to disconnect the battery, naturally i lost radio settings and all that good crap. But I need a code for it to work again. Does anyone have or know of the code or any code I could try before i go and rip out the radio to get the serial # and then wait a week or longer for mitsu dealer to give me one?

Thanks

 

[Defiant]

Each has its own code -although I've heard rumors of a "master" code, I've yet to hear of anything past the rumor stage- and a good dealer will let you have it over the phone. Pulling the radio's minor, plastic trim and 4 screws. You might be lucky, and have the serial number on the top case of the radio instead of on the back, and be able to get it without even having to yank it. To remove the trim, use something plastic (like a comb or a plastic putty knife) to pry out the bottom edge of the trim, then pull out evenly to get the two metal clips on the edges, about halfway up, to let go.

 

[turboclipse]

I figured there was a seperate code for each, but it was worth a try. Thanks for the help though.