The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Wheel question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BC1087

Probationary Member
5
0
May 14, 2009
Milwaukee, Wisconsin
I know everyone hates these will these fit my car questions, but ive been getting mixed answers to fitting an 8.5" wide wheel on a 2g gsx thats lowered 1.5". Is anyone running a 18x8.5 wheel? I think approximate offset should between +40 or +45. Any help is appreciated ( and pics wont hurt either). Thanks
 
Anyone? Im looking at a wheels that are 18x8.5 +45. Tires would be 225/40/18. According to the wheel fitment guide they should work, but i want to be sure.
 
I have the same question about some wheels I'm planning on buying. I searched but the only real thread I thought would help wasn't helpful. Hope you get an answer, and hope someone can answer mine as well. 17x7 +42 with a 215/45R17 tire. Eventual lowering to be about 1.5" on Tanabe springs.
 
17x7 +42 will fit. I know that. Still havnt seen anyone running 8.5 in wide or any info on what offset they are using.
 
The wheels im looking at only come in +45 and i do not want to use a spacer. How close will this be to clearing the suspension... or not clearing?
 
I have 18x8.5's with a +38 offset on my car (which you can see in my gallery). I have 235/40r18's and clear the rear knuckle but had to do a little rolling of the rear fenders. You should be okay at a +45 as long as you stick with a 225/40r18. If you try to go any wider you will rub. That being said, I would look for something with a bit lower of an offset, like a +40, as previously mentioned, so you can run a wider tire.
 
They won't fit if you just slap them on, a friend of mine has a 98 talon with 18x8 and he is rubbing a little on the sidewall, you will have to roll the fenders for your tires to not rub the sidewall to death.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top