92 conversion on 90 eclipse help !!!

[1G16G Gst]

Anyone i'm lookin for wut exactly i need all way round for the front end conversion and where i can get a cheap CF hood like fo 350$ and wut does the conversion cost witout price of hood.....and if so does anyone have a conversion they are willin 2 sell ???



92 conversion on 90 eclipse

 

[talonproject]

well pretty easy for a fairly cheap solution

front + rear bumper + 2 fenders+ hood + headlights (+paint)

then ebay s your friend

U can buy one of those body kits on ebay for like 150$
http://cgi.ebay.com/ebaymotors/90-9...060839994QQcategoryZ36475QQrdZ1QQcmdZViewItem
then those crystal clear headlights + side for 140$http://cgi.ebay.com/ebaymotors/92-9...060677951QQcategoryZ33710QQrdZ1QQcmdZViewItem
+ front fenders http://cgi.ebay.com/ebaymotors/92-9...060183254QQcategoryZ33644QQrdZ1QQcmdZViewItem
(look70$ for the pair...it s ajoke !)

My only question is about the wiring of the headlights but i guess it shouldn be too hard to solve anyway
so that s like

150+140+70 = 360 (no hood)(200$)http://cgi.ebay.com/ebaymotors/92-9...ryZ33646QQssPageNameZWDVWQQrdZ1QQcmdZViewItem (or it s 350 for the VIS one)so + shipping/handling ans whatever fees + the paint
(try to get a seller that sells all these items so u ll pay less in shipping)

 

[Booster-Shot]

Why would you want to go to the dark side of 1gs in the first place?!?!

 

[HighPsi92GST]

Anyone i'm lookin for wut exactly i need all way round for the front end conversion and where i can get a cheap CF hood like fo 350$ and wut does the conversion cost witout price of hood.....and if so does anyone have a conversion they are willin 2 sell ???



92 conversion on 90 eclipse

You need :
92-94 Fenders
92-94 Bumper
92-94 Hood
92-94 headlights and side markers
Search the forums
and
A little knowledge on wiring.

Basically everything is bolt on. You will need to change some wiring to make them work, I think in the past in a thread I said which wires go to what, searching might help you find that. If not, I am doing the conversion on a 91 GST within the next week or 2 so I will finally get a chance to do a full tech guide "how to" on this topic.

 

[obx tsi]

i am about 90 percent done with my conversion and it takes more than just unbolting and bolting to get the job done. be prepared to remove brackets that are spot welded and install the appropriate brackets. if you dont have the brackets then good luck at making it work. i have completed the front and rear along with wiring and now just need to finish the doors.

 

[obx tsi]

also will need a paint job.