The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

does anyone else have this problem?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dude,

When the door is being difficult, do yourself a favor and check to see if the window is getting caught outside of the frame. Mine does the same thing. The 2G shop manual has a procedure to adjust the full up height of your window. they become a little mis-aligned sometimes and go up too far after a few years. Adjusting the window cures this quick.
 
what he said is right, mine did the same and it was the lock itself on the door latch, the window was fine but then the door would like jiggle, take your door panel off and tighten the bolts on the outside of the locks, check the ones on the other side too
 
Originally posted by hideki03
can you two elaborate more on how it's hard to open??!?!

use WD-40 :p LOL, works on anything ^_^



It just won't shut. I have to slam it several times just every time I get into the car. I have to roll the window down to get it to line up also. It's a pain in the ass.


WD-40 won't work this time. Thanks anyway ;) !!
 
My window trim on the top is not soft rubber anymore so mine is sometimes hard to close because the window is practically hitting a wall. After I get them replaced it should be all better. You might want to check and see if yours are dry rotted.
 
Is your door aligned? When you go to shut the door slowly, right when the latch pieces contact, is there a lot of resistance to shut the door the rest of the way?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top