Can i replace thie myself ?

[dsm4life]

The stripping around the door/window is bent out and i think thats how water is building under the door. After it rains i open the door and water is sitting on that little edge. Look at pics. Can i do this work ? if yes where to get parts ?

 

[Nanan]

Yes you can do it yourself. Yes you can get the parts. Mitsu dealerships should be able to get them for you for 90-130 each side.

Somwhere down the line I need to do this also, some jackoff trying to break into my car bent it out and cut it up. Must of been a total retard and didnt realize it was a sashless window.

 

[krummel45]

You can get it for $64 at this site. http://www.machv.com/19updoortrim.html

 

[1998gstspyder]

any of you ran across that same trim but for spyders? i usually see the coupe's trim but not the convertibles

 

[dsm4life]

thanks guys i am going to attempt it once it starts to get warmer out

 

[95eclipseGST008]

I just did it. The top was easy. Each side took about 20 minutes to do. About 12 screws under the weather stripping. There is a write up on how to do it in this forum. It looks so much better. I got mine from Machv but its the same ones you get at the dealer. I think that water collects from under the door though, between the side skirts and door caps.