Removing rear wiper any plugs that fit?

[StarDiamond]

I was wondering if anyone knows any plugs on are car or where you can get a plug that fits the hole in the rear widow wiper?

 

[Stealth_Racing]

??? I thought shaving stuff involed body filler and paint .

 

[koenigseggCC7]

when i used to own a honda i saw this on a honda forum: use jb weld on antenna, windshield washer, spoiler, and rear wiper holes

its much stronger, and in those areas that dont need to flex it works wonders

just put some screen over the hole n jb weld the hole n then sand it down n primer the whole area n ur set

tj

 

[Four20A T]

when i used to own a honda i saw this on a honda forum: use jb weld on antenna, windshield washer, spoiler, and rear wiper holes

its much stronger, and in those areas that dont need to flex it works wonders

just put some screen over the hole n jb weld the hole n then sand it down n primer the whole area n ur set

tj

JB WELD ARE U SERIOUS?????!!!!!! DONT LISTEN TO THIS GUY......JB WELD IS ONLY TEMPORARY, DO IT RIGHT THE FIRST TIME.....DONT WASTE MONEY ON MAKIN UR CAR LOOK GOOD IF IT AINT GONNA LAST.....

 

[its_hey_ma]

What would be the right way ?
I've been searching for a plug also to fill up the wiper hole. No luck yet.

The right way to shave a car is to take everything you don't want off and then weld new metal in its place. the take body filler and smooth everything over. Remember, body filler is not a replacement for metal and should never exceed 1/8" in thickness

 

[4Restore]

Welding and repainting the deck lid is the correct way, but you were asking for a plug.
You may be able to get these at lowes but if not try http://www.mcmaster.com/catalog/108/html/0704.html
It couldn't be any less tacky then the wiper.

 

[Flash]

StarDiamond, you beat me to asking this question... But since it's already been asked, I'll ask a different question... what's a dollar figure to have the hole shaved smooth and then having the rear hatch repainted?