The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Alarm installers! problem with arming

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

eviltalon

20+ Year Contributor
71
0
Sep 22, 2002
Nottingham, New Hampshire
I have a 95 TSI that has a DEI alrm that someone before me put in. The problem that I'm having is that when I got my new remote, every time I turn the key, the alarm seems to go into shutdown mode. When I remove the key, the LED on the dash stays on constant, and the parking lights don't flash, but the keyless entry still works. When I unplug it, and then plug it back in, everything works again untill I use the key in the ignition. I checked the fuses and connetions and nothing seems to be wrong. Its not a huge deal, but really annoying. Any help would be great. Thanks
 
Oh, and if it helps, I just had the remotecode cut today. Thanks in advance for the help.
 
for some reason it is going into valet mode. Is there a switch somewhere for the valet mode. On my alarms, you have to turn the ignition on and hold the switch for 10 secs. to turn the valet on. Valet shuts everything off except keyless entry. See if you can find a valet switch and go from there.....
 
I agree, must be valet mode. My alarm light is always on constant when a door is ajar or when in valet mode.
 
i run a custom car shop, and we are a DEI dealer. you are going to have to find the valet switch, and either unplug it, or get a new one. the swtch probably went bad. if you need more info, i need to know excaclt what kind it is. what it says on the alarm.. i can get you the wiring diagram to tell you what wires do what. just let me know
 
Thanks for the help guys. I replaced the valet switch and it works. Now if I could only find out what happened to the siren......:p
 
what's wrong with the siren? not workeing right or at all. One quick tip, if your siren is pointed even slightly upward, it most likely got warter into it. Water will sit in there until it seeps into the siren. If it's shot, you can get another one cheap. just make sure when you install it that you point it downward. Even just the slightest bit so when water gets into it it can run back out without sitting in it.. But 9 times out of 10 thats the problem
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top