ebay turbo kit... would this an ok kit

[97eagletalonesi]

found this kit some stats on it are

DOHC Eclipse 420A turbo Kit

Custom Made ready to install

This is a High Quality kit that gives you the advantage of upgrading your car in the future. it is capable of over 350 whp but runs great as an entry level setup with only 6 psi on your stock internals. The turbo will start spoolingas low as 2300 rpm and will spool hard all the way to redline in every gear. Don't waste your money on an expensive kit when you can buy better parts for half the price here. We stand behind what we sell, check our feedback or e-mail / call with any questions.

Comes with the Following Parts:

Garrett T3 Super 60 Turbo
Stainless Steel turbo manifold
20x6.5x3 Intercooler
Copper Gaskets




Brand New not Rebuilt

Garrett T3 Super 60 turbo



Internally Wastegated at 8 psi

0.48 Turbine A/R

0.60 Compressor A/R




Spool at 2300rpm or faster



Intercooler with Greddy Core

20x6.5x3 core

Not your normal Cheap ebay intercooler








High Strength Copper Gasket

Never need to be replaced, Will last forever

Comes with Header Gasket

& T3 Gasket

[SnoopySLR]

there is no way it will spool at 2300prm.

is this just a turbo, manifold, and intercooler?

Cause your going to need piping, fuel pump, FMU, oil lines, a blow off valve, missing link, and a downpipe.

[siueclipse]

give us an ebay link.

[prostreetdsmx1]

Originally Posted by SnoopySLR

there is no way it will spool at 2300prm.

sure it will, the super 60 is a small turbo and it says start spool meaning it will be getting started around there. Just make sure it isn't some cheap kit that will crack up on you after the first couple of months.

[SnoopySLR]

Originally Posted by prostreetdsmx1

sure it will, the super 60 is a small turbo and it says start spool meaning it will be getting started around there.

My bad...

He probably didn't want to post the link, cause he doesn't want anyone to bid on it.
Don't worry, you can trust us

[siueclipse]

i really dont need some POS ebay kit at this point .heheheh

[selmerguy]

that "kit" is made by mike hart from thestreetsource.net. i am having him make my manifold and downpipe. he shipped me a manifold but i bought a neon one instead of an eclipse. what he sent me looked like good stuff. but that kit will cost you a grand. i put togeather a whole turbo kit for 1300 from ebay and got the same parts and much more than you are getting.

[XMasta19]

I'm doing the same as selmerguy piecing together my kit, and I'll be getting my turbo, manifold, downpipe and possibly a few other items from their ebay store. I've spoken with mike a few times, and he's a good guy. Their kits are good sh*t, and won't burst, crack, explode, etc. (ssautochrome ). Mike has just told me that's he's actually in the process of putting together a new kit for the 420A that he hopes to have available by the end of the week. I'm waiting for him to release it, but he's also told me that he has no problem selling parts individually and helping piece together a kit, which is what I'm doing.

Make sure to let us know what you end up doing and how it all works out. I'll be posting soon enough about my acquisitions, and I know selmerguy has already had a thread about his. Good luck!

[97eagletalonesi]

i prob wont do anything till i sell my truck. with that monthly payment out of the way i can my shit caught up then i do something. but then agin i may get brave and buy it. at least it free shiping

[XMasta19]

Yeah, I can't wait for my tax return check to get here within the next week or so...shopping spree time! Oh wait, my wife is making me pay off the credit card debt in excess of $35 that I've managed to accumulate over the past year.

[Bostedquest]

I was looking at maybe getting the SSautochrome header...

is it worth it?

[XMasta19]

EWWW!!! Lots of horror stories about them, just do a search on it and make an informed decision for yourself.

[Redmachine]

I have a ssautochrome header and it is just fine, no probs. I know you guys are talking about a turbo header but still, I'd Buy from them. Nice thick flanges and no real discoloration over the last year and a half. best 100 bucks I've spent on the car so far

[XMasta19]

Oh, don't get me wrong, I know guys as well that have had no problems at with with their products. I just wouldn't feel comfortable knowing of the string of problems that can and have occured to others, that's all. Like I said before, he needs to search the subject and make an informed decision for himself.

[selmerguy]

i got my turbo, wastegate and bov from them ill tell ya how they work if my mani and dp ever get here.