A Few Questions about Turbo's

[prop7459]

Okay you guys, what would be a better turbo for me to achieve 300whp on 15-18psi tuned? Out of the three turbo's listed, which one will spool faster and work effecientlyat these boost levels?I know the bigger the turbine, the more lag the turbo creates, but the large turbine will give you more top end power. What is a good combination of a trim and turbine a/r for my setup that will allow me to reach this goal?

T3:60 Trim Compressor .63 A/R
T3:Super 60 Compressor .63 A/R
T3/T4:Compressor Trim 57 A/R .63

My setup for the future is going to be:

Custom turbo kit
Port&Polish Head with a 3 angle Vavle job
600cc injectors
Crane 14's turbo cams
JE 8:8:1 Pistons
Eagle Rods
And a whole lot of stuff that I don't think I need to type for this thread

 

[EclipseRacing99]

you can make that power with less boost on a 50 trim t3/t04e. in the tech articles section there is a write up on some of the turbos. i believe there is one on the 50 trim t3/t04e turbo.

 

[prop7459]

With the 50 trim on the t3/t4, at what rpm would I feel full boost?

 

[EclipseRacing99]

heres the link to the write up for a t3/t04e 50 trim on a 1g. it will be just a little different on you car how it responds because your compression is higher than his.
http://www.dsmtuners.com/forums/showthread.php?t=53719