oil pressure sending unit

[eclipse2gnt95]

HELP PLEASE i am about to have the stage 1 hahn race craft installed but i cant get the oil pressure sending unit off does any one know if it takes a special tool or special socket its a 95 gs please help

 

[fububmc]

I bought a gauge for that like a month again and i couldnt get the old one out ether, where it is at, its to hard to get at. I found the socket size for it but i can seam to get in there to get levrig.

 

[Defiant]

Brass and aluminum will tend to seize together after enough years. Try getting some heat on it. Don't go crazy, the aluminum will crack.

 

[Ebster1085]

I just installed a hahn stage 2 kit on my car, and i had trouble removing the pressure sender unit as well. It was an easy fix however...all you have to do is go to a local car store and get an oil pressure sender socket. It is like some special 12 point socket or something, like 8 bucks.

 

[eclipse2gnt95]

i got her off thanks alot i just stopped buy auto zone grabbed the socket and popped her wright off

 

[Eclipsemblue]

!! were is the oil feed line, i cant find it i know its under the throttle body in that area, anyone got a pic !!! or more information on how to locate it thanks

 

[eclipse2gnt95]

right by the trasmission housing where it bolts to the motor its a silver nut half silver then turnning to black plastic and then plugs into a seperate wire thats the oil pressure sending unit plug well right next to that like 1 inch over is the line and the fitting

 

[eclipse2gnt95]

do you still need the information on the oil feed line i have the information and can help you with it. Write back if help is needed.