420A: Looking For Local ECU to Test

DroopYeyeS · 06-10-2012, 09:51 AM

Hello, I'm looking to see if there are any 420a DSM's in my area, that would be willing to play donor to my car for a few minutes. Need to test a known good ECU on a '95 GS to trouble shoot a no spark on 2&3 issue. I've done everthing there is to do except buy a new ECU. Since that is not a cheap part, I'd like to test it first. I'm in the Middletown OH area if anyone is willing to help with this I can be reached @ ambient12@hotmail.com.

jayson427 · 06-10-2012, 09:59 AM

If theres no spark on 2 and 3 it could be your coil pack. Have you checked the ohms on the coil? It should be between 0.56-0.65 to test good.

DroopYeyeS · 06-10-2012, 02:57 PM

Thanks for the advise, but as I've said I've done everything there is to do on this thing. I have another thread from awhile back when I first started working on it. I am to the point that I need either an ECU or there is a bad wire somewhere. but since pin# 41 on the ECu is not pulsing, I am leaning towards the ECU. Just need to see if some one is near by for me to use 1 for a moment to verify before I spend $212 on a new one.

jayson427 · 06-10-2012, 09:27 PM

is your motor stock? you could pull one from a junk yard for 30 bucks instead of buying for 200 lol

DroopYeyeS · 06-12-2012, 05:01 PM

Right, but I haven't found any at nearby yards for under $100. At that price I'd like the warranty to boot. No one near by up for this?