tranny swap

[99greenrst]

whats up guys anyway i have a 99rs with a star stage 2 kit and all the goodies i have a auto with a tranny cooler but now im runnning 15 pounds of boost and the tranny dont like it now it slips alot so im thinking of swaping in a manual but first build it up since i want to run 22 pounds shortly but need to know how hard it is to swap and what i need does it just drop in etc. i cant find a write up on it if anyone has one point me in the right direction please i need this car running reliable at 22 pounds its my daily driver thanks later

[baxsom]

First, please use grammar. Your post is one big run on sentence and is hard to read. Second a stage 2 kit if you are using the standard definition of stages ie, turbo and intercooler with no engine upgrades will not handle that much boost.

Now, let me try to help
http://www34.brinkster.com/chamukogs...20document.htm

better version
http://www34.brinkster.com/chamukogs...0by%20Mike.htm

I hope these help.

[BigRand]

I wouldn't run 22psi on the street if your looking for realibility.

I've got a issues running at 12-13psi on the street going up from 10psi on my low boost.

But I've got an electronic controller and run 10psi on the street and I'll run somone at that boost until they prove to me that I need more. Then I push a couple of buttons and go for it again.

[shiftdrift06]

Since were on the topic and this might benefit the author of this thread also. Would majority of Avenger MTX parts bolt up with no problem? Reason I am asking because they are more abundant at junkyards. ty.