The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

420A test pipes

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Pegasus

Probationary Member
18
0
Jun 14, 2002
hey do you guys know where i could go to get test pipes made for my car, i saw the ones on machv.com but i didnt know if i could get them made for me for cheaper or what. thanks.
 
i thought test pipes were bad for n/t because our cars dont make enough back pressure hense we would loose hp. i thought test pipes and gutting cat backs were only good (making power) for tubos
 
Originally posted by RACER-X
i thought test pipes were bad for n/t because our cars dont make enough back pressure hense we would loose hp. i thought test pipes and gutting cat backs were only good (making power) for tubos
You're right.
 
backpressure is never needed in any exhaust system. What you want is to maintain exhaust gas veocity. Too big of an exhaust and you will lose that velocity at lower RPMs but will make power up top because of it. Using the test pipe in the same diameter of your exhaust should not cause any problems other than making your exhaust louder.
 
like the guy above said... Backpressure is not the absolute answer... I would do 2 1/2 inch piping and get an exhaust system with the largest amount of flow. Removing the cat. is a good idea, but it will change your sound somewhat.
 
ok then its not back pressure thats in question with a test pipe and cat system or full exhaust system... it's the size of pipe that can make you loose power. thanks good reading, hella' long but good reading.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
Back
Top