The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

automatic reverse goin out.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

teamwen

Probationary Member
15
0
Oct 15, 2007
springfield, Ohio
i have a 99 eclipse gs. thats automatic. its got like 101 000 miles. my reverse doesnt work. it finally gave up on me.it was givin me a grinding vibration feeling when it was workin on its last days. but now it just revs in reverse. at the same time. my drive is fine. i checked my tranny fluid. its fine. anyone have suggestions? thanks.

ive looked through the forums. and all of them talk about manual reverses goin out. i have a AUTOMATIC.
 
Do you have any trouble pulling it into any of the gears? (i.e. is it hard to move the shifter)

You might try pulling off the linkage from the tranny and putting it in gear by hand (you might need pliers) It's worth a shot.

Other than that... You might be going to the junk yard sometime soon!!!
 
Last edited by a moderator:
no i dont have troblem puttin it into gear. u think i need a tranny?
 
My tranny did the same thing. It lasted like about a week with the other gears.
So it turned out i was grinding the sh!* out of the gears. Any how i got the tranny rebuilt.
It was like $1800 to get it rebuilt.
 
That's a good possibility... From what you are describing, the gear is just gone.
I would still try to shift it from the engine compartment (with the linkage removed) but chances are it still won't work.

Sorry for the bad news. If you are still unsure, I would bring it to a shop with a newer scan tool. They should be able to access the tranny computer to see if it's doing anything strange... I think at least.

Used transmissions aren't that expensive so you're not out too much. Epically if you can do the work yourself.

Good Luck.

Edit:
My tranny did the same thing. It lasted like about a week with the other gears.
So it turned out i was grinding the sh!* out of the gears. Any how i got the tranny rebuilt.
It was like $1800 to get it rebuilt.

It will be A LOT cheaper if you just get a used one from a junk yard. A LOT!
 
Last edited by a moderator:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
Back
Top