ECMlink WOT Sputter

[matt98eclipse]

I just finished downloading the newest software and got your 2 newest files downloaded into the ecu and corey i must say man each time i do a 3rd gear pull its getting faster and faster your doing a great job man! Also i did a cold start idle and cruise log along with a 3rd gear pull. Tell me what you think?

 

[matt98eclipse]

Hey guys i added a little more boost and switched out my boost controller with a good one now my boost is under controll a bit better now. Heres 2 of the newest logs now with boost set at 25psi.


first log was with my 2 step dam thing launch so hard!! flowing 45lbs

second log was a 3rd gear pull along with a little big of cruise.

Tell me what you guys think about these logs please!

 

[gofer]

We're kind of doing the ass-backwards since I know your closed loop fuel trims are garbage but, while you're doing WOT pulls, we'll get you going fast first I suppose.

Advanced timing a bit during spool up and retarded it at peak boost and a few degrees where you upset the knock sensor a little. Also tweaked the VE map so your WB better line up perfectly next time you mash the gas.

---> You're maxed running Link v3 lite on 26psi. Read the product comparison page, v3 is good to 10k RPM and 40psi and v3 lite is good to 8k and 26psi. Wiki: Product Comparison

 

[matt98eclipse]

Asome corey ill upload those tunes into the ecu tomorrow and get back with you to let you know how she does! Looks like i might be takein her out to the track this weekend to see what kind of slips she will run

That sucks that were pretty much maxed out right now Looks like ill have to upgrade to the full version now!!