The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Clutch &pedal problem HELP!!!

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

eclips3_xs

10+ Year Contributor
79
0
Jul 23, 2008
Burbank, Illinois
Hers whats up with my clutch. I dont know if its the slave cylinder or clutch. I bleed the clutch the pedal gets hard which is ok because i got a act max extreme clutch kit with a street disc. After a while of driving the pedal becomes softer and the gears go in hard or dont go in at all. Plus is it normal for act clutches to grip 1/4 from the floor or something is wrong. I keep adjusting it but no use. And i been working on this for days and its disturbing pissing me off.:beatentodeath::beatentodeath::beatentodeath:
 
did you adjust the master at the floor?

vfaq has an article titled "adjustment" in the drivetrain section.
 
I would assume clutch master dude, Id get a better one. The stronger your pressure plate the more stress on the clutch master.
 
If bleeding stiffens pedal feel, but then slowly goes soft again, you have a leak. Find it and fix it before you burn you clutch.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top