|
Im going to attach a paint picture of what is going on since my camera is down for now. the gray is the fitting on the end of the upper ps hose, and the red is the (aftermarket i suspect) banjo bolt that seems to have been forced into the fitting. the teal is the upper ring seal, and the part of the bolt that i can get out of the fitting by hammering on it. lower lip with the blue is the lower part of the bolt that i cannot seem to get out of the fitting. the bolt looks nothing like the picture posted above, and the upper ps hose fitting certainly doesnt just "slide" off the bolt like it should. any thoughts on getting that damn bolt out without harming that hose fitting?
|