Anything else??

[daltah]

I just got this turbo
http://cgi.ebay.com/ebaymotors/ws/e...=330021633144&sspagename=ADME:B:EOIBSAA:US:11
and was wondering do I need anything else to bolt it up? Also what size injectors should I get a have s-afc2 and just want to be around 300awhp or 350crank. I already have a walbro255 and fpr

 

[GOTLAUNCH?]

Not to bash but good luck with the turbo. There are a ton of posts on this topic and the whole "staged" haha upgrades on what you need. SEARCH please

 

[dalatinromeo]

It says it comes with an install kit, but the pics dont show a J-pipe; which you def need. You can email them to see what comes with the install kit.

 

[GOTLAUNCH?]

BTW don't use that oil feed line. I've read some past threads with ppl saying not to use it. Get an SS line right away. Also check the manifold to turbo bolts (4-10x1.25) and see if they're OEM or @ least OEM quality (grade 10 or higher) cause I've made the mistake of using aftermarket bolts other than OEM and every single one has taken a dump on me i.e. threads sucked, snapped, yada yada. Make sure to use anti seize on all the bolts on the turbo except for the water lines and oil feed and drain.

 

[daltah]

Whats wrong with that turbo? Isnt it a stock evoIII16g? Also it says it has a 1 year warrenty. Is it a cheap knock off?

 

[Mike1992]

Isnt it a stock evoIII16g? . Is it a cheap knock off?

Its a kock off made by ssautochrome. Good luck with that....