The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

blown turbo?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

burntheblobs

15+ Year Contributor
133
2
Feb 4, 2004
Lafayette, California
My Evo 3 16g has horrible lag and it isn't getting any better. I'm seeing 15 psi @ 5000 rpms. I've done a boost leak test and so far the only leak I hear is a small one from the throttle body shaft seals. I am also blowing dark smoke if I rev the engine. I did a compression test and got good numbers. I checked the shaft play on the turbo and the side to side seemed like it moved a descent amount. The fins where not very smooth when I was feeling them either. The turbo is very loud when it does spool (by this I mean I can hear it pretty well over my full 3 inch exhaust). Think its a blown turbo?
 
it could be a blown turbo but usualy they don't make any boost at all also are you leeking oil? the black smoke is from running too rich. do you have and adjustable fuel pressure regulator?
 
gsxeclipse95 said:
it could be a blown turbo but usualy they don't make any boost at all also are you leeking oil? the black smoke is from running too rich. do you have and adjustable fuel pressure regulator?

Exactly. Blown would usually consist of major oil loss, no/low boost or a combo.
 
I am leaking about a quart of oil every 250 miles. I know I have a leaking return line so that could very well be the culprit for that much oil loss. I know I am running EXTREMELY rich (13mpg). My spark plugs show it too. Is the manual boost controller suppose to leak air out of that bleeder before it hits my set boost level? I have set the boost at 15psi and when I preform my leak test it starts spitting air out almost right away...lots of it too.
 
burntheblobs said:
. Is the manual boost controller suppose to leak air out of that bleeder before it hits my set boost level? I have set the boost at 15psi and when I preform my leak test it starts spitting air out almost right away...lots of it too.
if its a bleeder type valve yes it will bleed air off until the set level. have you checked the turbo for shaft play?
 
It is a Slow Boy Racing MBC though. It should be ball and spring...maybe my problem is a shot boost cotroller...
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
  • For sale 1g 1GB Eclipse Tail Lights
    1GB Eclipse Tail Lights $80 + shipping and paypal fees* not flawless but in very good shape...
    • jersygsx
    • Updated:
    • Expires
Back
Top