The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Just did first sucessful T-Too-Small to 14b swap on a 2g :)

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SRiz

20+ Year Contributor
448
1
Oct 6, 2004
South Georiga, Georgia
Well I did it in an hour with my friend even though we snapped off the oil feed line goin to the head got a new one and holy crap my cars fast!! I have all supporting mod to run a good 17-19psi i have 190 walbro pump... 2.5 downpipe to a 3" greddy evo...and I aslo have the MBC-2a from dejon...my only problem is that if im in 1st or 2nd gear and I hit it it will go to 19psi right away and then settle back down to whatever its set to... I dont think its the boost controller because if im in 5th gear and i let it get to full boost on stock boost it goes to 13psi(beacuse of exaust housing porting) and to 16psi when i flip the boost controller switch.. is there ne thing i can port or ne thing to fix this... Im pretty sure its not the boost controller
 
Only one hour? Wow great job, took me uhh...significantly longer :D
 
LOL thanx yea i had my friends help which has a BMW help me and hes like I thought BMWs were hard to work on!!! it took an hour to install the turbo and after i snapped the oil feed banjo bolt off it took an hour and a half to figure out the threads were messed up :( 14b POWER!!!!! 16g here i come.... o is 19psi ok BTW??!
 
Take it easy with the title, I'm going to fix it this time, but I don't want to see it again.
 
samnumba1 said:
Well I did it in an hour with my friend even though we snapped off the oil feed line goin to the head got a new one and holy crap my cars fast!! I have all supporting mod to run a good 17-19psi i have 190 walbro pump... 2.5 downpipe to a 3" greddy evo...and I aslo have the MBC-2a from dejon...my only problem is that if im in 1st or 2nd gear and I hit it it will go to 19psi right away and then settle back down to whatever its set to... I dont think its the boost controller because if im in 5th gear and i let it get to full boost on stock boost it goes to 13psi(beacuse of exaust housing porting) and to 16psi when i flip the boost controller switch.. is there ne thing i can port or ne thing to fix this... Im pretty sure its not the boost controller
Thanks for keeping us updated.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top