Picture identification...PLEASE!

[Hotshyt]

ok, the little white top(top left)...was on here when I purchased it...can anyone tell me what is supposed to go there...and what it is for?

You must be logged in to view this image or video.

 

[arash15]

is your BOV venting? because it looks like its a plugged dump tube

 

[Hotshyt]

no...the BOV is the turbo xs type S on left side...follow recirc track

You must be logged in to view this image or video.

 

[IHeartTurbo]

I'm 99% sure that's the where the recirc tube from the bov goes back into the intake.

:EDIT: I know that's what it is. I just looked at my stock intake I have laying around and that's it.

 

[Hotshyt]

so what did the previous owner most likely do...b/c the BOV hose goes back into the Intake..so did this hole have to be plugged? Just trying to learn...I know I sound 'tarded

 

[92redman]

so what did the previous owner most likely do...b/c the BOV hose goes back into the Intake..so did this hole have to be plugged? Just trying to learn...I know I sound 'tarded

That hose is the vacuum source for the bov. As far as I know, you can't recirc the type s, at least it doesn't look like you can.

 

[GSX]

That hose is the vacuum source for the bov. As far as I know, you can't recirc the type s, at least it doesn't look like you can.

Bingo! That is the stock 1G intake pipe with a plug .. the connection you are noting is for the vacuum source.

The TurboXS Type S does not recirculate:

You must be logged in to view this image or video.

Thanks,

 

[Hotshyt]

ooooh...THANKS GUYS!!! I appreciate it...its been buggin me b/c I don't like a white clorox bottle cap electrical taped to my engine...

 

[fwdturbobov1996]

Does that look like a Greddy type s to anyone else but me?

 

[QuickSilverGSX9]

From that picture, it is a Greddy Type-S.

-Bill

 

[GSX]

From that picture, it is a Greddy Type-S.

-Bill

The Greddy Type-S has a much larger (diameter) valve body - are you basing this assumption off the color of valve? And I think Hotshyt can be sure of what type of BOV he has .. also, pretty sure that Hotshyt didn't connect the vacuum line to the Greddy's adjustment screw.

 

[QuickSilverGSX9]

I'm basing it off the fact that I know what one looks like, and from that picture (as limited a view as it is) it looks like a Greddy Type-S. Also, I'm not sure Hotshyt knows what's on his car because he told us his BOV was recirculated when it's quite obvious from the pictures it wasn't and that those things were done before he purchased/obtained the car. Not insulting anyone here, I obviously don't have the car infront of me, for all I know he has something totally different from the two choices we've established. That's why I said from the picture it was a Greddy Type-S, not, "there's nothing else that could possibly be and everyone else who says otherwise is wrong!" Yup, so there ya go.

-Bill

 

[Hotshyt]

SORRY!!! I just realized/figured out what venting mean...that dump is where the BOV recirc...right? so b/c I am venting this dumb must be plugged to work properly...ok..now to find a way to recirc this bish...i don't like the vent of air at vent....


I'm trying to learn so be easy and bear w/ me please