S-AFC question

[eclipse619]

I just installed A S-AFC in my 2g gst today and have a quick question. All my settings are at zero at the moment is that why I am not getting a
reading when I monitor the AFL it just stays at zero %.

 

[Blk_99gst]

No, our cars don't measure air flow by what the safc calls air flow, so that value will always be zero. You should have set up the safc for a karman maf; therefore you should looke at the karman hertz reading on the safc.

You should keep the correction values at "0" and keep your stock injectors in your car; and don't mess with fuel control until you completely understand the safc and have a logging device. Just some advice; you don't want to ruin your engine...

 

[candela]

 

[eclipse619]

Thanks that makes me feal much better knowing I installed it wright. All I have is Injem Intake 3" exhauste Blitz turbo timmer and hunnycombs removed. I bought the S-AFC and the AVC-R for 500 dollers so I jumped on the deal. Now I have to learn how to install the AVC-R does anyone know of a good webpage I can go to that will help me with the AVC-R install on our 2g thanks for your help, and I will be keeping everything at zero untill I understand it more thanks once agin.

 

[kpt4321]

Wait a second here guys.

Are you saying that when you look at airflow on the logger, you see zero all the time? Also, why does it say that the airflow is at zero percent? The airflow should not be a percentage.

Where are you looking at this, on the SAFC or on a logger?

...Kyle T.

 

[eclipse619]

Originally posted by kpt4321
Wait a second here guys.

Are you saying that when you look at airflow on the logger, you see zero all the time? Also, why does it say that the airflow is at zero percent? The airflow should not be a percentage.

Where are you looking at this, on the SAFC or on a logger?

...Kyle T.

I am looking at it on the SAFC. When I go to monitor the AFL on the SAFC it reads at zero %.

 

[Blk_99gst]

Originally posted by eclipse619

I am looking at it on the SAFC. When I go to monitor the AFL on the SAFC it reads at zero %.

Yes, on the safc it will read zero. Look at karman and that should be changing quite a bit.

 

[eclipse619]

Thanks for all your help guys I need to go get an air/fuel gauge next before I drive my car but next its time to install my AVCR. If anyone has any suggestions or a great webpage I can go to so I can learn please let me know I would greatly appreciate it, This is how I learned to install the SAFC by searching the web hehe thanks agin guys.