TunerPro RT/timing question

[talon187]

ok right now i have a maf pro and it uses the TunerPro RT software. i contacted jeff from KEYDIVER Chips - DSM ECU Tuning and hes sending me a custom chip for myself. i had him add the timing control feature to the new chip. my question is what should the timg be set at in the TunerPro RT program? the reason why im asking this is becaaused i used someone elses file to get my car running and its from a 3000gt. if anyone knows the answer please let me know

[Black_Bullet]

You could look up a stock timing map for a dsm.

This may give you an idea
http://www.jeffgst.com/id20.html

Once your in boost above about 4k rpm at WOT the rest is up to you to decied how you want your timing map to be, depending on how much you can get away with, your boost level, afr, current mods etc.

[talon187]

hrmm the rt tuner program is diffrent i talked to jeff and he told me to 0 out the spark woot acorss the board so thats what ill do for now untill i get the afs back in order when the chip goes in and then go from there

[Black_Bullet]

Yea just keep it simple until you get everything figured out.
A conservative setting on everything wouldnt hurt.