safc help

heater · 07-26-2005, 02:02 PM

i have read alot of fourms that people install the safc and then cant start the car i dont want this to happin to me i have a logger but want to know what to set the safc at right now. i have mbc and b16g i have a 255 and 550's but waiting on my fpr to get here so havent installed them but want to put in safc to get a jump on it. also right now im only running 9 lbs of boost to be safe with stock fuel. i have a 98gsx

CanadianTSi · 07-26-2005, 02:07 PM

Just leave it at 0 if you haven't done any fuel mods yet.

DSMTalonAWD51 · 07-26-2005, 02:29 PM

hey said he has 550s. set lows and hi's to -10ish so the car wont drive like ass, but dont do any WOT driving until you figure out the logger. to go tech sectin read up

CanadianTSi · 07-26-2005, 04:23 PM

Quote:

Originally Posted by DSMTalonAWD51

hey said he has 550s.

You might want to re-read his post

spyderturbo007 · 07-27-2005, 06:38 AM

Here is a great SAFC-II walkthrough:

http://www.racingknowledge.org/topic.asp?TOPIC_ID=1011

You really need to get that AFPR installed before you do any "hardcore" tuning. I would stay out of WOT until you get the AFPR installed. Just try to set the FT's the best you can and transfer those settings to the Hi-throttle table. Then stay out of the throttle.

Enjoy!

CanadianTSi · 07-27-2005, 10:53 AM

I think the ECU can handle the stock injectors quite fine so I don't see why he needs to set his FT's or stay out of WOT