Is It Hard To Tune Using A Datalogger!!!!

[squeak10686]

For the most part do they do a good job....

and REALLY are they very hard to use... just give me some input... I dont know if its worth me spending 300 extra for a wideband...

thanks andrew

[blcknspo0ln]

you have a 95.. that means you have EPROM..

IMO skip the safc/logger combo and go straight DSMlink

if not, i just started tuning and it's really not hard at all..

[ACKERSON]

I agree. dsmlink is the way to go, even if you have to save some cash to get it. Tuning with a logger is not to hard but it's way easier with a wideband 02 and a logger.

[squeak10686]

but can you get the car pretty accurate with just the logger???

[rdeterman]

get the eprom chip rechipped by dsmchips or a keydriver chip for the larger injectors that will have a decient tune already

[squeak10686]

and than just go with the timing curves from there??? is there anything else besides the timing that i need to tune from

[Mackzero]

Don't waste your time with anything but DSMLink. It is the best thing next to full stand alone. Then buy your Wideband 02 next, and you're done.

[MarkDML]

using an EGT, what is the correct egt reading?

My EGT probe is on the #1 runner on the exhaust manifold...

and without using a dyno, what rpm should i be going for on each and every gear?

Mark

AIM: MarkDML
E-Mail: MarkDML@aol.com