head flow with SBR G50'trim

[liquordrunk]

i have a stock block and im goin with a SBR G50trim and with a stage III prted head and magnus intake and EVO mani ported i should get better FLOW so that in which would mean that my turbo would spool faster correct?? if so that would mean i could go with SBR60-1 on a stock block with hks 264/272cams and should have reasonable spooltime around 3600 correct ? guesstimate?
thanks for any input

 

[suicidal2af]

Headwork and cams will actually make your turbo spool slower. You'll flow more air, but you will have less velocity. The flipside is that you will make a LOT more power with your headwork and the cams.

You will spool slower though, don't doubt that.

 

[BlackHawkAWD91]

I have a PTE 50 trim internal gate. 264/272 Cams, 19PSI at 3550-3600. Extreme PSI race FMIC with 2 1/2 Pipes. Hope this helps.

Happy Boostin