Well I did a 3rd gear pull and logged it for the first time. 16G set at 9psi. Any feedback would help.

RPM TIM O2

3364.0 17.0 0.9
3420.0 15.0 0.92
3504.0 11.0 0.94
3592.0 9.0 0.94
3684.0 9.0 0.94
3776.0 9.0 0.94
3860.0 9.0 0.94
3956.0 9.0 0.94
4048.0 9.0 0.96
4124.0 10.0 0.96
4216.0 10.0 0.96
4308.0 10.0 0.96
4380.0 10.0 0.96
4468.0 11.0 0.96
4560.0 11.0 0.98
4624.0 11.0 0.98
4708.0 11.0 0.98
4788.0 10.0 1.0
4852.0 11.0 1.0
4932.0 13.0 1.0
5016.0 11.0 1.0
5056.0 11.0 1.0
5140.0 13.0 1.0
5180.0 13.0 1.0
5264.0 12.0 1.0
5340.0 11.0 1.0
5416.0 13.0 1.0
5468.0 13.0 1.0
5548.0 14.0 1.0
5588.0 14.0 1.0
5680.0 15.0 1.0
5756.0 15.0 1.0
5816.0 16.0 1.0
5888.0 16.0 1.0
5952.0 17.0 1.0
6016.0 17.0 1.0
6124.0 18.0 1.0
6152.0 19.0 1.0
6220.0 20.0 1.02
6284.0 20.0 1.02
6368.0 19.0 1.02
6408.0 19.0 1.02
6464.0 20.0 1.02
6516.0 20.0 1.02
6584.0 21.0 1.02
6324.0 21.0 0.88

looks to me like your running a little too rich from your o2s. try leaning it out and see if your timing advance stays in one place rather than boucncing up and down.

looks to me like your running a little too rich from your o2s. try leaning it out and see if your timing advance stays in one place rather than boucncing up and down.

looks to me like your running a little too rich from your o2s. try leaning it out and see if your timing advance stays in one place rather than boucncing up and down.

sorry damn comp screwed up

how do i lean out without an AFC???