blcknspo0ln
DSM Wiseman
- 7,772
- 101
- Jul 31, 2003
-
Central,
New Jersey
My friend and I were bored one day and decided to paint his rims. Which lead to a two day escapade involving lots of dust and paint..
well, here are the after shots and I think the wheels look SICK on his car
btw, procedure was as follows [ allow stock wheels ]
1. wash/clean/dry rims
2. sand with 180 grit
3. sand with 400 grit
4. wetsand with 1500 grit
5. mask off the little circle areas
6. 3 coats of sandable primer
7. 4-5 coats of flat black paint [ we used VHT exterior paint ]
8. 5-6 coats of clear coat [ also VHT ]
enjoy
and yes, my car is being lowered next week

well, here are the after shots and I think the wheels look SICK on his car
btw, procedure was as follows [ allow stock wheels ]
1. wash/clean/dry rims
2. sand with 180 grit
3. sand with 400 grit
4. wetsand with 1500 grit
5. mask off the little circle areas
6. 3 coats of sandable primer
7. 4-5 coats of flat black paint [ we used VHT exterior paint ]
8. 5-6 coats of clear coat [ also VHT ]
enjoy

Attachments
You must be registered for see attachments list


i know. It came with the car and will soon be swapped to the CF rudora [ wangan ] or whatever you call it spoiler. IMHO either spoilers looks better than stock
we just decided to make them stand out a little more. and I think mission accomplished.
