Vacuum Lines: I've made a mistake...

[chet]

i just installed an act clutch and suspension into my 89 dodge colt. everything works perfectly but the car isn't going into boost, and the idle is not consistent once the car warms up. i'm pretty sure its a vacuum line related problem...its just that i'm used to honda's and haven't really had much experience with dsm's.

if you guys could throw out some suggestions...and possibly send me a link to someone's website describing the vacuum line setup on these cars i would really appreciate it.

and my colt has a 4g63 in it, with a manual boost controller. it seems as though the lines are connected correctly, from the wastegate to the boost controller, although i'm not sure after that.

any help would be great appreciated.

thanks, chet

 

[BUCK]

http://www.taboospeedshop.com/emissions.htm

 

[chet]

i fixed the problem...i didn't have the vacuum line connected to the blow off valve...

i was tired last night...it just took a second look at it to figure out what the problem was.