The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

car still stranded, not pump..ignition?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

forcedfedgsx

20+ Year Contributor
183
0
Apr 29, 2003
i posted about car stranded and fp dead but its not. so i guess its ignition, i put a volt meter on the plug wire aand grounded it to the car and it didnt read any real voltage. how can i test the ignition system? i was getting rich/lean reading before this happenedand the car was running weird for like a month. i guess it could be the cas cause it was running weird then it quit while driving it..?any help on ignition, cas, or ways to test any thing would be great.
 
Go to you local automotive store and purchase a spark tester..sells for 5 bucks tops. Put it on the end of you spark plug wire and ground the tester to you chasis. Have someone crank the engine and see if you see the spark jump. Continue this procedure with the remaning wires. If everything checks out and has a good spark, then it is not your ignition system.
 
tested the CAS it works or atleast i think so cause it cycles through from a low voltage to high when turning it over. I still dont have any spark. I need some help. what about the crankshaft position sensor? or the ecu??
 
Originally posted by jrivard00
Go to you local automotive store and purchase a spark tester..sells for 5 bucks tops. Put it on the end of you spark plug wire and ground the tester to you chasis. Have someone crank the engine and see if you see the spark jump. Continue this procedure with the remaning wires. If everything checks out and has a good spark, then it is not your ignition system.
Do This.. A multimeter is a poor way to check for spark
 
hey thanks for the help. i found a loose connector on a sensor that connects to the intake manifold. Im not sure what it is but since i have a 1 gen manifold and head i just have it bolted to the manifold and it was unclipped. It started right after.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
  • For sale 1g 1GB Eclipse Tail Lights
    1GB Eclipse Tail Lights $80 + shipping and paypal fees* not flawless but in very good shape...
    • jersygsx
    • Updated:
    • Expires
  • For sale LC2
    Used LC2
    • Anthony Hornback
    • Updated:
    • Expires
Back
Top