Help, low power, bad idle, new timing belt... help plzz

[wooliebeast]

Oh my... Ok i stopped my car one day and went to get back in it to leave and the moter just turned but won't start so i tore in it and replaced all the 5 belts new dual friction clutch, moter mounts plugs, plug wires , fuel filter, ring gear, fly wheel oh by the way its the 4g63 6 bolt 2.0 o2 sensor timming marks line up and the oil gear lines up with balance shaft and all but the d*** thing back fires now with no kind of power. Seems like its not firing all cylinders but i checked it and it was. no smoke, all gauges working good and no ecu codes are being thrown out but it has no power and won't idle and just runs like poop no ticks or knocks no smoke starts every time fuel presure is good... coil pack tests are ok and the values are right on... What gives? if any one has a clue plz help me

 

[ltvarney]

Sounds like maybe timing is off or plug wires are mixed up. I know you checked the time but that's what it sounds like. You can check the plugs for fouling, that might give you a hint on what the problem is. Sorry I don't have any more input.

 

[wooliebeast]

Yeah i checked the plugs and the plug wires routing but everything looks good on that part but i just found a thing were on some blocks that you should advance the timing belt mark on thew intake by one tooth so i am going to try that and give ya a response on my findings but thanks alot for your input, at times i become faulty and will forget something like the plug wires being done wrong... we are only human...