The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Shooting Fire from Intake Manifold

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mach4g63t

15+ Year Contributor
402
0
May 28, 2007
St. Louis, Missouri
Okay, so here's the run down... mods in profile are up to date...

Just got my car cranking and starting up today. Haven't worked out the kinks, but it's firing and coming online until I left off the throttle then it dies.

My real concern is that when I DO crank the motor, as it fires up and starts to run, I'm getting pops of fire from under my injectors/between the manifold and head...

WTF Anyone ever heard of this? My friend is saying it's because I only used the phenolic gasket without any sort of RTV or secondary gaskets for the head/intake manifold. I don't know how true this is, but I thought 'fire' should only ever go towards the exhaust... EVER! We thought it was just some unburnt fuel popping off from when I initially started cranking... but it's doing this often...

Anyone got any advice or guidance to offer? My only logical guess is to boost leak the system and see if there is a leak at the phenolic gasket and go from there... really stumped, and so close to having this biotch going. Just need some advice .... thanks!
 
i would check timing, the only way you should have fire from the intake is a valve being open, whether it be out of timing majorly or broken valve
 
I was thinking the head is potentially bad. The compression test came back at about 120 across the board on a rebuilt bottom end. I was just hoping that it was low because my bottom end wasn't broke in and the rings haven't set yet. I actually went and priced out a SBR stage 2 head already because I was just assuming that it was no good, but then I saw the 'fire' today and became really scared. Timing is dead set though. I mean, the motor turns over and comes alive. It even ran up to about 3.5k rpm the first time I actually got it to fire up and stay up for a few seconds... just worried about those puffs of flame...
 
Yesterday I went back to dicking with the car again. I went to zero out all my trims on Link and discovered for some reason my Ingition Timing was retarded completely. Zero'd it out and haven't seen the problem since. :thumb: Now, if I could just keep myself from retarding my intelligence.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top