Engine rewired, 2 sensors left over

[Fayt]

I just got done rebuilding my motor and did a minor wire tuck as well. Well, I have two left over plugs that I have absolutely no idea where they go. I'm not even sure if they go to something in the engine bay. Also, from my dash I have two hanging wire harnesses in the same situation, but I'm pretty sure they are just left over/excess from the factory. If someone can confirm that for me it'd be appreciated.

 

[turbosax2]

They both are on the fuse box harness, come into the cabin behind the drivers side fender, and connect to plugs from the interior harnesses and/or interior fuse box.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Fayt]

Both of those plugs are already used by the harness. The white cord has a black box, while the harness uses a light green box. I triple checked all the interior harnesses and couldn't find where it is supposed to go, unless it goes into the passenger side.

Wait, I see slightly the black boxed connector. I'll check again, maybe it goes farther into the dash then I thought.

 

[liquidz28]

Dont quote me on this, but that looks similar to the MAF plug and the temp sensor plug for the stock thermo gauge.

 

[liquidz28]

OOPS!

PS. under the dash when i did my heater core (17hrs it took me) i found at least 10 multi wire plugs up in there that went to nothing, everything in the car works so i dont get it.
i think they wired all the cars no matter what, for convertable, power windows ETC. even if it was not an option, so that i would assume explains the extra plugs/harnesses. hopefully that helps.

 

[Fayt]

I'm pretty sure they are just extra harnesses also. Guess all I can do is get the car started and find out!

 

[spooln4fun]

The first picture to me looks like a harness for the radio