New SBR Fans

[STGGSX]

I need some help with wiring the new SBR 12" fans i did two and want to hook them up to the stock wiring harness. would anyone know what wires to cut into, i know there are four wires per fan on the main and the ac fan. also does anyone also know the cfm of the stock fans

 

[Nanan]

The stock pass side fan is roughly 1100 cfm from what I have seen in old posts back on the old dsmtalk, it flows well but it draws a crapload of current and is noisy.

I do not remember the wire colors but I used the common ground and wired the high/low together and taped off the ac fan set. I have two Flexalite 12" fans hooked together and just leave them on all the time via Dsmlink.

I do not know what the SBR fans look like but they are likely just 2 wire reverseable fans, make sure they are going the right direction or you will have overheat issues. I do not care what people say, pusher fans suck next to pullers, just look at the specs for reversable fans, its usually 3-400 cfm lower when pushing.

 

[STGGSX]

thanks man sounds great