The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Scraping noise from wheel?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BLUEBLOTCH

15+ Year Contributor
810
1
Apr 30, 2004
Amarillo, Texas
When I am driving I get a squeel from my right front wheel, Almost like when the squealing sound when you start to brake. I cant feel it, just hear it. When I gently step on the brake to slow down but keep moving it the noise stops.
What is it? Wheel Bearing? :confused:
 
First, I'd look at your brake pads. If they are ok, check the metallic backing plate behind the rotor to see if it's touching. If that's ok and it's not a rumbling noise too which could be wheel bearing then I'd say that you have metallic brake dust buildup on your brake pads. You can do 2 things. 1, find a remote area and get up to 40-50 mph and hit your brakes pretty hard. Don't lock them up, but bring it down fast. Do this a few times. 2. You can remove your pads and take a wire brush on a grinding wheel and clean them.

It will do it again. Metallic pads gather rust and rust is metal. Metal rubbing against metal will squeal.

Good Luck
 
Old Mitsu Tech said:
First, I'd look at your brake pads. If they are ok, check the metallic backing plate behind the rotor to see if it's touching. If that's ok and it's not a rumbling noise too which could be wheel bearing then I'd say that you have metallic brake dust buildup on your brake pads. You can do 2 things. 1, find a remote area and get up to 40-50 mph and hit your brakes pretty hard. Don't lock them up, but bring it down fast. Do this a few times. 2. You can remove your pads and take a wire brush on a grinding wheel and clean them.

It will do it again. Metallic pads gather rust and rust is metal. Metal rubbing against metal will squeal.

Good Luck

Thanks for the quick reply! :thumb:

Are you saying take a brush to the actual brake PADS?

I have been think of replacing them since I havent had teh car that long, itsi usually one of the thing I do after getting a new car. Its some stupid peace of mind thing I have. Would that possibly fix teh prob?
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest Classifieds

  • For sale 4G63 NEW Stop Tech Drilled And Slotted Rotors
    New Stop Tech Drilled & Slotted Rotors $70 + shipping and paypal fees* FITS * Eclipse GST...
    • jersygsx
    • Updated:
    • Expires
  • For sale 2g 2G GSX/GST Manual Transmission Steel & Poly Mount
    2G GSX/GST Manual Transmission Mount (Steel & Poly) $45 + shipping and paypal feesYou must be...
    • jersygsx
    • Updated:
    • Expires
  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
Back
Top