help new turbo and boost controlrer

[sammy787823]

i have a question about my 20g turbo. I have just installed. I have a profec b-spec2 electric boost controller. It says to connect hose to compressor housing. Do I need to get a nipple that fits in a small hole on the compressor housing? There is not on on the compressor housing, a small, small hole, about 3/16. On my stock turbo it is about a 1/4 to a 1/2 inch nipple. Or do I hook the hose to my injun intake where the stock boost controller was connected?

If this is posted in the wrong area, please let me know where and how to properly post.

Thank you,
Sam

 

[justin0469]

http://greddy.com/tech/PROFEC_B_SPEC2.pdf

 

[jackalopeTsi]

I dont know about EBCs but my MBC i have tapped into the line running from my manifold to my BOV. i think you can use this instead of a nipple on the compressor housing, and i have never seen a 20g and i dont know what to do about the hole.