The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

2g 420a gas in oil anyone?

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

racemeornot

Probationary Member
1
0
Sep 9, 2005
scottsboro, Alabama
my baby is loading up.getting gas in the oil any help.ive checked the injectors changed the fuel pump pressure regulaotor but still loads up.compression ratio and fuel pressure are both good.the car runs strong but loads up.no missing.i have aftermarket coil and headers and exhoust would any of these be factors.
 
well, i am pretty the only way that gas can get into the oil would be if there is blow-by (excessive space between the piston rings and cylinder wall) so when the piston is going up to compress the fuel and air, some of it gets past the rings and goes down into the crankcase...we had an old yamaha moto-4 that had alot of gas in the oil, turned out to be a needle valve seal in the carburetor, so fuel was getting past that when it shouldnt have, so gas kept leaking through.. so if you have something pumping fuel when it shouldnt, then that could be your problem...
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Latest posts

Build Thread Updates

Latest Classifieds

Back
Top