fanman487
Probationary Member
- 18
- 0
- Aug 18, 2003
-
Middletown,
Ohio
Ok here's my current setup: 2g GST, intake, all stainless IC piping, 2.5 turbo back exhaust, Dejon Tool MBC. The last thing I put on was the exhaust. As soon as i did i noticed that when i went WOT my car would start to sputter at about 15 psi. I assumed it was the MBC increasing the set boost due to the increased exhaust size in addition to the max psi capacity of the stock turbo ( 17 psi so im told), so i tuned it down to 13 and 10 psi (i have a duel stage controller). Still, when my boost hits 10 psi, the car starts to cut out. I can give medium to full throttle and hold all the way to 9 psi or so with NO problem, but as soon as i hit 10 psi, power goes down the tube. Am i looking for a ported 02 housing and bigger fuel pump??? I can hit redline in neutral and it does it cold or warm. Is this even fuel cut? From what i have read fuel cut is supposed to be like hitting a brick wall at about 60 mph. This is more like a misfire. Help for the uneducated?
Thanks,
- fanman
Thanks,
- fanman