The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

1g needs major help

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

beating4g63s

15+ Year Contributor
525
3
Oct 31, 2004
port arthur, Texas
alrighty my friend just bought a 90 tsi talon and it's got some major problems we've both been looking on all forums and couldn't find anything like this first problem is the altenator bolt that is on the bottom near the power steering belt keeps popping out when ever he drives it the bolt when popped out is almost touching the belt but it just sits there still attached. second problem is does anybody know ruffly how much a headgasket and 1st and 2nd snycros are going to be his are going to blow any day know and it's pretty hard to shift sometimes. and does anybody know of a fourm that shows how to replace the syncros at all. were on a diy mission and really need this car to run.
 
1. There should be a nut, or a threaded hole on the back of both bolts holding the alternator on..put crush washers on them and torque them on.

2. A headgasket itself will cost around $100...but labor will get you. If you are on a DIY mission, it'll cost you the part and maybe a day of work. It would also be a good idea to replace your timing belt components when you do the job as it all has to come off anyways.

3. Check out this link for the tranny rebuild
http://www.twingles.com/ideck/rebuild3/dretranny.htm
 
dude thanks your are my new best friend OMG it took us all last night to try and get that bolt hooked up right but still wouldn't work was gonna do a jb weld job but we knew it wouldn't work. thanks for the help gonna try that tonight.
 
To second the 2nd poster, a lock washer is definately needed there. The bolt is actually the alternator pivot bolt, and unless it is secured on the engine side under tension it will definately work it's way out sometime. When I pulled mine apart it already had a cut-ring washer in there to begin with.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 2g VRSF 2g FMIC.
    Bar and plate. 28x10x3.75. 2.5 inlet and outlet. 36.5 on center inlet and outlet Pretty...
    • Galant665
    • Updated:
  • For sale 2g Eclipse/Talon Passenger Side Fenders
    95-99 Eclipse/Talon Passenger Side Fenders
    • Sdcryan1
    • Updated:
    • Expires
  • Wanted Driver Side Front Side Skirt End for 97-99
    Looking for the driver side skirt end molding. Bonus if it has the mud/rock guard.
    • ProjectDSM
    • Updated:
    • Expires
  • For sale 1997 Eagle talon esi
    runs and drives located in Oklahoma City
    • Nii
    • Updated:
    • Expires
  • For sale 2 bare 7 bolt motors
    bare 7 bolt bottom ends
    • Nii
    • Updated:
    • Expires
Back
Top