bisne
Probationary Member
- 21
- 0
- Sep 22, 2004
-
Calexico,
California
Ok , I need some help, I pull out the engine and rebuild it, all was ok, when i put the engine in , I reconect all according to the manual, electrical sockets, vaccum lines etc..
There its fuel and spark, but the fuel injectors dont have power, I sprayed a little bit gas into the TB and the car starts. I check the injectors harness for current power and there its none.
What could be wrong, i will go to check the ecu for any Bad caps , because its a 1990 Laser Turbo.
But any other advice are welcome.
Bisne...
There its fuel and spark, but the fuel injectors dont have power, I sprayed a little bit gas into the TB and the car starts. I check the injectors harness for current power and there its none.
What could be wrong, i will go to check the ecu for any Bad caps , because its a 1990 Laser Turbo.
But any other advice are welcome.
Bisne...
