The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

NON DSM related. Please help tho

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.

UnderPressure5L

Probationary Member
2
0
Nov 21, 2004
toms river, New Jersey
I recently bought a centrificul supercharger for my car used.. It came with a Greddy Tpse S BOV mounted in the discharge pipe..

Anyways, i started it at 5 psi of boost and it was fine.. The BOV sounded real good... then i threw the boost to 9 with a bigger crank pulley and drove the car probably a month, making frequent trips to the dyno and track... the day after the track, i got on it down the road and as soon as i shifted hard out of boost, the blower made a god aweful noise... When i pulled the belt off, i noticed that the pulley could not turn.. the oinside seized up! Soo i sent it back to vortech since its warrentied (i did not tell them i changed the pulley ebcause that would void it).. When they finished looking at it, they told me that it surged.. they only warrentied half because i did not use a VORTECH bypass valve, but an aftermarket one.... My question is why?????? The car makes 350 RWHP and 375 rwtq... Is the type S too small? or is there another problem. As you can tell, i dont know much about blowoff valves... thanks
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community

Latest Classifieds

  • Wanted 1991 tsi AWD auto engine harness
    Looking for a engine harness for my 1991 eagle talon AWD tsi auto trans If anyone has one hit...
    • sanmantsi72
    • Updated:
    • Expires
  • For sale 1997 eagle talon tsi
    I have a 1997 eagle talon tsi fwd auto for sale. It has 108k miles and in good condition.Recent...
    • El_marto
    • Updated:
    • Expires
  • For sale 1G DSM 4G63 PARTS
    Cleaning out my shop closet, Buyer covers shipping & fee.Parts:.20 Over Turbo 6-Bolt Block...
    • The_Partout_Spot
    • Updated:
    • Expires
  • Wanted 4G63 800cc injectors
    Im looking for a set of injectors that are at least 800cc. Thanks!
    • DSM_Thorpe
    • Updated:
    • Expires
  • For sale 2g 2g rear brace arms
    2g rear subframe brace arms. Missing one of the bushing spacers. No rust. Had someone looking...
    • Galant665
    • Updated:
    • Expires
Back
Top