Broken Banjo bolt in turbo oil line

[Crazy91GSX]

Hey all.. While installing my new 14b, I over tightened the banjo bolt for the oil line to the turbo. Its the bolt on the turbo, not the head. I can not find that bolt anywhere.. no part stores down here carry the bolt that big. Anyone have the same problem before? Know an easy fix or know where I can find one? Or, can I use just water to cool the turbo, I mean, can I plug that hole and the hole in the head? I highly doubt it, but it never hurts to ask.

Thanks,

Adam

 

[nined2tsi]

Negative on the plug. You HAVE to get that bolt. The only place to find it would prolly be the dealer. Maybe NAPA?

 

[nined2tsi]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33742&item=7906362508&rd=1

Just saw that ad and thought it would be of help. Its for a 2g but maybe itll fit.

 

[mitsutuner]

You get the banjo-bolt from where you got your turbo, or any online parts place that sells turbos, naturally you would want to check with the dsmtuners.com sponsors & parts catalog at the top of this page .
You might consider getting the kit that has the oil line & fittings for changing the source of oil from the engine block to a threaded fitting that's already on the oil filter housing,(2nd gen style). This means cooler oil going to your turbo bearing-need I say more.