skunk2 coilover w/ tokico shocks

[chrsg546]

I have skunk2 coilover on my car, now yesterday I left my car to a local shop to install tokico shocks (none adjustable).

When i got my car back, it was high as hell!! It's probably about stock height, i have 40series tires on my 16" rims and my car just looks retarted. The coilover is set to the lowest it could go.

Did they did something wrong? or is there just a problem because i have a skunk2 coilover on a tokico shocks?!

All response are welcome. Some1 help me out!

 

[chrsg546]

no one know what could be the problem?

 

[tkrPerformance]

ok did they leave the stock spring purches on the shocks?
I have the same set up on my awd spyder but have the 5ways. You need to cut off the purches at the welds on them so the skunk2s will sit on the welds and use all the rubber ring they give you with the 2's
here is a pic of the rear end of my spyder of what I am talking about
and by the way the rear is droped all the way down 3 1/2 in.'s

 

[chrsg546]

It's just for some reason skunk2 coilover doesnt go with tokico shock on the front only. So I returned it back to them and now I have KYB AGX shocks on the front and tokicos at the back, oh well. At least my car wasnt that high anymore.

 

[my98GST]

I'm having this same exact problem. I have AGX shocks. The rears sit down fine but the front's have the perches cut off and the skunk2 coilovers are let all the way out and it still sits at stock height..... Whats going on?

 

[damnthecops]

i have agx struts, you shouldn't have to cut anything, those are made for your car there shouldn't be any modding involved

 

[my98GST]

Anyone else have some ideas?

 

[Red97Eclipseboy]

I've had Skunk 2s and Tockico 5 ways on my car for about 3 years now. Just cut the perches on the shocks off, and you're done. Adjust the ride height of course.