What supports needed to upgrade my turbo

[1997 Eclipse]

I have the following mods:
Greddy Big FMIC, 660cc, Walbro Fuel pump, intercooler piping, S-AFC, Profec B, Intake, Apexi N1 exhaust, Down pipe, No cat, Big 16G, 264/272 cams, TRE Spec FWD M/T, etc

What other mods do I need to support an upgrade to a FP3052 or a FP Green?

Dan

 

[Revolution]

Well it looks to me that youve done a pretty good job so far , as for extra mods for the fp green,, you will definitally need their new intake pipe , but things like a new exhast manifold external wasgate and oil lines come to mind . Forced performance will give you everything you need for the add ons.

What you should really be concentrating on now is how to get all that power to the ground. But then again you might have already addressed thet since ect. could really mean anything.

Happy tuning.

 

[Spellmen]

If you still have the stock 2g Bov, upgrade to a crushed 1g

 

[Groomz]

You can run as a low as 14psi on the FP30's, so you can get one now and turn up the boost when you get more mods.

 

[1997 Eclipse]

Thanks guys for the input. I have a Greddy BOV, Tokico Illuminas.
New springs to come - not sure which ones yet but the TRE tranny should get the power to the ground. What about the drive axles? Should I upgrade? If so which ones and where do I get them?

What about internal mods? Do I need them such as head work etc or do I only need them if I turn the boost past 17 PS1?

Dan

 

[1997 Eclipse]

If I go the FP3052, what kind of figures will I get? At what rpm do they spool? Is there an equivalent low sppoling turbo out there?

Dan