The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Max Boost on 20G

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

HASHIMOTO

20+ Year Contributor
82
0
Jun 27, 2002
London,
what is the max boost that i can run safely ona 20g with alcohol injection, good FMIC, and a very well tuned AFC?

is 22psi too much cuz i really plan on gettin in the 400whp range?
 
Max boost you can safley run depends on:

1. Your engine internals.
2. Your tuning Skills.
 
AND what octane gas you intend to run. That is not unreasonable if you are running C10 gas or better. 400whp@22psi with a 20G will take some tuning though.
 
:laugh: I love when posts like this come up from the dead.... shows that some people actually search :thumb: I don't even remember posting that....
 
Originally posted by midnght
Does this include all variations avaliable?

I'm not guaranteeing that his setup will be efficient to 27 or 28 psi. I'm just saying that the compressor wheel of the turbo isn't going to bother doing anything cool past there.
 
The HRC super 20G turboseems to be running out of steam in my car at about 28 to 29 psi. above those levels, the turbo begins to output hot air, and hp is reduced slightly.

The avenger made over 400 hp(5700 rpm) and over 400 lb ft of torque (4500 rpm) at 30 psi on tuesday, and this number would defintely increase in higher rpms if the turbo would hold 30 psi to redline.

This is what was said about the HRC by Armond.
 
BTW I just got done looking at your mods list Kyle and the time your running with that 14b just aint right :) Nice tuning.
 
Originally posted by DSMNightmare
BTW I just got done looking at your mods list Kyle and the time your running with that 14b just aint right :) Nice tuning.


Those times are from last year, when I still had stock injectors and no MAFT or SAFC.

This year should be even better.:thumb:

Thanks though!
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 4G63 Wanted
    Looking for a kiggly HLA
    • steelcurtaindsm
    • Updated:
    • Expires
  • For sale 2g 1998 Eclipse GST Rust Free
    Rust free, not perfect, prob needs motor soon. 125 compression all 4
    • Zanaqqq
    • Updated:
    • Expires
  • For sale 1g Int door plastics MB517837 and MB517834
    Int door plastics MB517837 and MB517834
    • ist dwa
    • Updated:
    • Expires
  • Wanted 2g WTB CLEAN HVAC PARTS
    Good condition , clean please no rodent infestation
    • ames905
    • Updated:
    • Expires
  • Wanted FIC Easytune
    Looking for a FIC Easytune box.
    • Stapl3
    • Updated:
    • Expires
Back
Top