blown tranny

[dsm199994]

Ok so what do you guy think happened I was going down the road in my 99 gst 7 bolt shifting from third to fourth when all of a sudden clutch went soft heard some s**t in the tranny breaking apart now there's huge holes in bell housing by clucth slave snd car wint turn over is somethinh jammed or is motor dead

 

[AMPPRC]

Sounds like one of the spring on the disk came apart. Happened on my gst I use to have.

 

[dsm199994]

So I'm looking at a new tranny and clutch then hugh? Could this have cuased crankwalk or should my motor be ok. There's a pic of the damage in my photos

 

[dfootedsm]

You will definitely will need a new clutch and you probablly fried a gear in the tranny if you didnt pull over right away. I wouldnt necessarily say it came from Crank walk. When it happened in my car the guy had a cheap Korean clutch in the car so you get what you pay for .... Go exedy if you want an affordable solution that wont blow up when its done. Either rebuild your tranny or sell your core to be rebuilt and find a used one . People are always parting them out here. PS you may have blown one gear so if its your DD, you can jump shift go from 2 to 4 or 3 to 5 if 3rd or 4th is gone. I've been missing 2.d for a while

 

[dsm199994]

thanks for the replies i pulled the tranny out waiting to find a new one so for now im stuck in my 420a... good news is my engine still runs. the clutch was missing all but one spring and the flywheel cracked so now i just gotta get the parts.

 

[gsxdragger]

What clutch set up are you thinking of going with

 

[dsm199994]

I was looking at a kit from clutch masters, Are they any good? its the fx250 if that helps. as for the flywheel what do you guys recommend