Wiring help for map sensor

[boostin90gs]

So my map sensor pigtails are already wired into my harness, but i wanna run ecmlink plug n play harness. need some help save way and correct way to make it back to stock.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[c2ypt1c]

Here you go
http://www.dsmtuners.com/forums/newbie-forum/417784-maf-t-wiring-problem.html#post152767039

EDIT: good 'ol vfaq http://www.vfaq.com/mods/2GMAF-1G.html

 

[lee98talon]

I'm not quiet sure( just did a quick search), but it seems to me like all you need to do is take off the pigtail of the MAP sensor off. Then just reconnect the wires back together by color matching the wires back together. Because it seems to me like the wires on the MAP sensor pigtail are just " T " off, so i wouldn't see why just taking off the pigtail and reconnecting the wire back will change anything except for no pigtail/map sensor signal. The links below should show what wire is what and how they installed the map sensor pigtail.

http://www.dsmtuners.com/forums/newbie-forum/401630-ecmlink-sd-wiring.html